76” High Sides – High Capacity End Dump High Side

Overview

Specifications

RANCO 76" High Side Demolition End Dump

38' Overall Length

36' Useable Tub Length

50 Cubic Yards

HYDRAULICS & DRAFT ARMS

Outboard Cylinder (No Doghouse)

Inverted Hydraulic Cylinder

BODY

AR400 Steel Construction

¼" Tub Forward Sections

5/16" Last Section upon request

76" Side Height

"Z" Brace Seam Strengthener

(3) Tapered Bolsters

Oscillating Kingpin

15' Draft Arms

4" Heavy Duty Rubber Bushed Hinges

TAILGATE

2-Way Tailgate (swing/barn door)

Passenger Side Mud Flap Swivel Bracket

Multi-Brace Tailgate

50,000# Tailgate

4" x 8" Gate Lock

UNDERCARRIAGE

Hutch H-903 Suspension

Tandem 22,500# Axles - 102" Wide

Maxi-Cans Mounted on top of the Axles

Outboard Hubs / 16½" x 7" Brakes

Frameless End Dump

4-On-The-Floor Dumping (Both Axles Stay on the Ground)

Continental HSR 11R24.5 Tires on 10-Hole Steel Disc Wheels

OTHER

Bolt-On Front & Rear Fenders

Telescopic Drop Legs

Ladder Mounted on Forward Bulkhead

LED Lights

Back-up Alarm

Sand Blast, Print and Paint

Feature/Benefits

• The Anvil’s constant radius half-round shape.
• The Anvil’s body is fabricated from AR400 abrasion resisting heat treated alloy steel.
• The thickness of Anvil’s body shell increases at the rear of the body.
• Body seams are reinforced with a continuous welded “Z” brace.
• The self shedding angled top rail design.
• A radius flanged front bulkhead.
• Anvil’s thick walled, closed boxed structural sections.
• The Anvil has a vertical, rear body cut off and rear bolster.
• All bolsters are tapered inward at the bottom.
• The suspension sub-frame includes a front bolster in addition to the rear bolster.
• Inverted, trunnion style, hydraulic dump cylinder.
• The Anvil end dump is designed to dump entirely by rotating around the single point tandem suspension trunnion.
• The Anvil has a fully adjustable, over-center locking gate latch powered by a double acting 4" diameter air cylinder.
• Rugged high lift tailgate and hinge design.
• Mud flaps are hinged and mounted to the tailgate with heavy duty brackets.
• The Anvil uses wide trac axles.
• The Anvil is equipped with bolt-on front and rear fenders.